TUNGSTEN OR DIAMOND GRIT BANDSAW BLADES

Tungsten Carbide and Diamond — Abrasive Cutting

Click the button of the product you’re interested in to discover all its features.

SRG

Special Grit Blade – Abrasive Cutting, Tungsten Carbide.

Unlike traditional toothed blades, the Grit series uses a cutting edge made of tungsten carbide particles bonded to the backing. This design allows cutting through micro-abrasion rather than chip removal, making it the go-to choice for materials that tend to chip, shatter, or would instantly destroy a standard tooth pattern.

Capable of cutting in both directions, reducing stress on the material.

The tungsten grit retains its cutting power even on materials that would prematurely wear any steel tooth.

Drastically reduces the risk of delamination or cracking on fragile, layered materials.

Main Applications:

  • Composite Materials: Carbon fiber, fiberglass, Kevlar® and reinforced plastics.
  • Construction and Furniture: Graphite, marble, granite, ceramic, glass and friction materials.
  • Rubber and Tires: Ideal for cutting tires with internal steel belting.
  • Special Alloys: Materials with extreme surface hardness or hardened alloys.
Dimensions (mm) GULLET CONTINUOUS
(Medium Grit) (Medium-Coarse Grit) (Coarse Grit) (Medium Grit) (Coarse Grit)
10 x 0.6 ● ●
13 x 0.6 ● ● ●
20 x 0.8 ● ●
25 x 0.9 ● ●
32 x 1.1 ●
Type Characteristics Recommended Use
Continuous Edge Maximum finish, zero chipping. Glass, thin ceramic, graphite.
Segmented Edge (GULLET) Better heat and debris clearance. Large composite sections, rubbery materials.

Technical Note: Grit blades perform best on machines with high blade speeds. It’s essential to maintain constant tension and, where possible, use a dust extraction or cooling system to remove the fine dust generated by the abrasive process. Use the gullet version when the material being cut is larger than the gullet width. They work by abrasion, not chip removal, so feed rates are quite low.

GRT

GRT Blade — Excellence in Diamond Abrasive Cutting.

The diamond-edged bandsaw blade represents the pinnacle of cutting tools for non-metallic and super-abrasive materials. Thanks to a sophisticated process depositing industrial diamond crystals onto a special, highly flexible steel backing, this blade can tackle materials that would be impenetrable to any other type of cutting edge.

Maximum Cutting Capacity: diamond, being the hardest known material, allows extremely easy cutting of ultra-hard alloys and compounds.

Reduced Heat Generation: abrasive cutting technology, combined with the correct speed, ensures a cold cut that preserves the chemical and physical properties of the workpiece.

Fields of Application:

  • Aerospace and Automotive: Cutting advanced composite materials (CFRP), technical ceramics and silicon alloys.
  • Silicon Industry: Cutting mono- and poly-crystalline silicon for semiconductors and solar panels.
  • Gemstones and Glass: Quartz crystals, optical glass, laminated glass and synthetic hard stones.
  • Luxury Construction: Fine marble, technical granite and thick porcelain stoneware tiles.
Dimensions (mm) GULLET CONTINUOUS
(Medium Grit) (Medium Grit)
13 x 0.6 ● ●
25 x 0.9 ●

Other sizes and geometries available on request.

Technical Note: diamond blades require strict operating conditions to maximize cutting-edge life:

  • High Speed: they require blade speeds much higher than traditional blades.
  • Cooling: constant use of coolant is essential to prevent diamond carbonization and ensure dust removal.
  • Dedicated Machines: use on saws designed for diamond cutting, equipped with abrasive dust protection systems, is recommended.

Use the gullet version when the material being cut is larger than the gullet width. They work by abrasion, not chip removal, so feed rates are quite low.

Data and tables are provided for guidance only; the company reserves the right to make technical or aesthetic changes without notice. ©NORI GUIDO – 2026

Scroll to Top